Chapter 3
12
Canceling a Broadcast in progress 3
a Press .
b Do one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the
name or number being dialed on the
Touchscreen. Go to step d.
To exit without canceling, press .
c When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
Press Yes to confirm.
To exit without canceling, press No.
d Do one of the following:
To cancel the current job, press Yes.
To exit without canceling, press No.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can do this by turning on
Real Time TX.
a Load your document.
b Press (Fax).
c Press Options.
d Press s or t on the Touchpanel to
display Real Time TX.
e Press Real Time TX.
f Press On (or Off).
g Press OK.
h Enter the fax number.
i Press Fax Start.
• If you are sending a color fax, the machine
will send the document in real time (even
if Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work.
To Next Page
Loading...
