Brother MFC-J285DW - N-in-1 Copies and Poster Layout

Making copies
31
7
Making N in 1 copies or a
poster (Page Layout) 7
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature, your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster.
NOTE
• Sort, Remove Background and
Enlarge/Reduce are not available with
Page Layout.
• 2-sided Copy is not available with
Poster copy.
a Load your document.
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Press s or t on the Touchpanel to
display Page Layout.
f Press Page Layout.
g Press s or t to display Off(1in1),
2in1(P), 2in1(L), 2in1(ID)
1
,
4in1(P), 4in1(L), Poster (2x1),
Poster (2x2) or Poster (3x3).
Press the option you want to set.
1
For information about 2 in 1 (ID), see 2 in 1 ID
copy (Page Layout) on page 33.
h Press s or t to review and confirm the
displayed list of settings for this copy.
If you do not want to change additional
settings, press OK.
i Press Black Start or Color Start
to scan the page.
If you are making a poster, the machine
scans the pages and starts printing.
j After the machine scans the page,
press Yes to scan the next page.
k Place the next page on the scanner
glass. Press OK to scan the page.
Repeat steps j and k for each page of
the layout.
l After all the pages have been scanned,
press No to finish.
m Press .
NOTE
• Make sure the paper size is set to Letter,
A4, or Executive.
• Poster copy is not available for Executive
size paper.
• You can only make one color copy at a
time.
• You can only make one Poster copy at a
time.
• Poster copy is not available when using
transparencies.
• (P) means Portrait and (L) means
Landscape.