Brother MFC-J415W

Other manuals for Brother MFC-J415W

Quick Setup Guide32 pages

Advanced User's Guide50 pages

Basic User's Guide122 pages

Guia Advanzada Del Usario59 pages

Technical Specifications2 pages

Guía De Configuración Rápida34 pages

Install Guide34 pages

Advance User Guide59 pages

Guia Basica Del Usario123 pages

Questions and Answers:

J
Jaime JohnsonSep 1, 2025
What to do if my Brother All in One Printer cannot detect the ink cartridge?
- M
  Michael JacobsonSep 1, 2025
  If your Brother All in One Printer cannot detect a new ink cartridge, it might be due to several reasons: * You installed the cartridge too quickly. Remove it and reinstall slowly until it clicks. * You are using a non-Brother Original ink cartridge. Replace it with a Brother Original ink cartridge. If the error persists, contact your Brother dealer. * The ink cartridge is not installed correctly. Take it out and reinstall it slowly until it clicks.
S
Samuel PrattSep 2, 2025
What does 'Comm.Error' mean on my Brother MFC-J415W?
- R
  ryan80Sep 2, 2025
  If your Brother All in One Printer displays a 'Comm.Error', it means poor telephone line quality caused a communication error. If this problem continues, contact your telephone company and request them to check your telephone line.
S
Shannon MillerSep 2, 2025
What to do if my Brother MFC-J415W All in One Printer is not feeding paper?
- G
  gallowaywhitneySep 2, 2025
  If your Brother All in One Printer is not feeding paper, make sure the Photo Paper Tray is in the Normal printing position. Refill the paper in the paper tray, or remove the paper and load it again. Also, check for any paper jams and remove them. Ensure the Jam Clear Cover is closed correctly.
B
Brian TerrySep 3, 2025
What to do if Brother MFC-J415W says 'Cover is Open'?
- M
  Matthew WheelerSep 3, 2025
  If your Brother All in One Printer shows a 'Cover is Open' message, it means either the scanner cover or the ink cartridge cover is not completely closed. Lift the scanner cover and close it again, and firmly close the ink cartridge cover until it clicks.
J
Jessica LeeSep 3, 2025
How to fix 'Cannot Detect' error on Brother MFC-J415W?
- T
  Tristan HolmesSep 3, 2025
  If you're getting a 'Cannot Detect' error on your Brother All in One Printer, it could be due to several reasons. If you installed a new ink cartridge too quickly, take it out and re-install it slowly until it clicks. If you are using non-Brother Original ink, replace it with a Brother Original ink cartridge. Also, ensure the ink cartridge is installed correctly by removing it and re-installing it slowly until it clicks.
J
Jason PriceSep 4, 2025
Why does my Brother MFC-J415W say 'Wrong Paper Size'?
- E
  Elizabeth JordanSep 4, 2025
  If your Brother All in One Printer indicates 'Wrong Paper Size', it means the paper loaded is not the correct size. Check that the Paper Size setting matches the size of paper in the tray. Load the correct size of paper.
R
Robert BeckerSep 4, 2025
What does 'Ink low' mean on my Brother All in One Printer?
- D
  deanna00Sep 4, 2025
  If your Brother All in One Printer displays 'Ink low', it indicates that one or more of the ink cartridges are near the end of their life. Order a new ink cartridge.
M
Mary AndrewsSep 5, 2025
What to do if Brother MFC-J415W displays 'Data Remaining'?
- R
  Richard MeyerSep 5, 2025
  If your Brother All in One Printer shows 'Data Remaining', it means print data is left in the machine's memory. Press Stop/Exit to cancel the job and clear it from the memory. Then, try to print again.
K
Karen WilliamsSep 5, 2025
How to fix 'Out of Memory' error on Brother MFC-J415W All in One Printer?
- J
  Jacqueline JohnsonSep 5, 2025
  If your Brother All in One Printer displays an 'Out of Memory' error, and a copy operation is in progress, press Stop/Exit and wait until the other operations finish before trying again. Alternatively, if you're scanning to a memory card or USB drive, delete unused files to free up space and try again.
J
jeffreyroblesSep 5, 2025
What to do if my Brother MFC-J415W shows 'High Temperature'?
- A
  abrownSep 6, 2025
  If your Brother All in One Printer displays 'High Temperature', it means the print head is too warm. Allow the machine to cool down.

Brother MFC-J415W Specifications

General

Print technology	Inkjet
Maximum resolution	1200 x 6000 DPI
Print speed (black, normal quality, A4/US Letter)	35 ppm
Print speed (color, normal quality, A4/US Letter)	28 ppm
Digital sender	No
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	2500 pages per month
Number of print cartridges	4
Scan speed	4.83 sec/page
Dimensions (WxDxH)	390 x 375 x 180 mm
Wireless technology	802.11b/g
All-in-one functions	Copy, Fax, Scan
Color all-in-one functions	copy, fax, print, scan
Compatible operating systems	Mac OS X 10.4.11, 10.5.x, 10.6x Windows 7, Vista, XP, 2000
Scanner type	Flatbed scanner
Grayscale levels	256
Image formats supported	BMP, JPG, PNG, TIF
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	1200 x 2400 DPI
Copier resize	25 - 400 %
PC free copying	Yes
Maximum copy resolution	1200 x 1200 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	23 cpm
Copy speed (color, normal quality, A4)	20 cpm
Faxing	Color faxing
Fax memory	170 pages
Modem speed	14.4 Kbit/s
Fax speed dialing (max numbers)	40
Total input capacity	100 sheets
Total output capacity	50 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	15 sheets
Compatible memory cards	Memory Stick (MS), MS PRO, SD, SDHC
Sound pressure level (printing)	50 dB
Display	LCD
Display diagonal	1.9 \
Market positioning	Home & office
Maximum print size	216 x 356 mm
Media weight (tray 1)	64 – 220g/m2
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	64 - 90 g/m²
Supported network protocols (IPv4)	IPv4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (standby)	4.5 W
Power consumption (PowerSave)	0.65 W
Power consumption (average operating)	19.5 W
Package weight	10900 g
Sustainability certificates	ENERGY STAR
Certification	Blue Angel