Control panel setup
37
4
Setup Relay 4
Relay Broadcast 4
This function allows the machine to receive a document over the Internet, and then relay it to other fax
machines through conventional analog landlines.
Relay Domain
4
You can register the Domain Names (Max. 5) that are allowed to request a Relay Broadcast.
Relay Report
4
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
• For more information on Relay Broadcast, see Relay broadcasting on page 65.
• In order to use the Relay Report function, you must assign the relay domain in the “Trusted Domains”
section of the Relay function settings.
Network I/F 4
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, choose Wired LAN, and if you want to use the wireless
network connection, choose WLAN. You can only have one network connection type active at a time.
To Next Page
Loading...
Need help?
General
