Brother MFC-J4310DW - Page 48

Control panel setup
42
4
Network
(Continued)
WLAN TCP/IP BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]
1
Subnet Mask [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]
1
Gateway [000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]
Node Name BRWXXXXXXXXXXXX= (your machine’s MAC
Address / Ethernet Address)
(up to 15 characters)
WINS Configuration
(WINS Config)
Auto/Static
WINS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]
DNS Server Primary/Secondary
[000-255].[000-255].
[000-255].[000-255]
[000].[000].[000].[000]
APIPA On/Off
IPv6 On/Off
Setup Wizard — (Choose SSID from list or manually add
SSID)
WPS/AOSS —
WPS w/PIN
Code
—
WLAN Status Status (Examples)
Active(11b)/Active(11g)/Active(11
n)/AOSS Active/Connection Fail
Signal Strong/Medium/Weak/None
SSID (Shows SSID with up to 32 digits)
Comm. Mode (Examples)
Ad-hoc/Infrastructure
MAC Address
Level1 Level2 Level3 Options