Home > Copy > Copy a Document
Copy a Document
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Make sure you have loaded the correct size paper in the paper tray.
2. Load your document.
3. Press (COPY).
The LCD displays:
Press Start
Normal
Quality
Plain Paper
Paper Type
01
4. Enter the number of copies using the dial pad.
5. Change the copy settings, if needed.
Press a or b to scroll through the copy settings. Select a copy setting, and then press OK.
When you load paper other than A4 size plain paper, you must change the [Paper Size] and [Paper
Type] settings.
6. When finished, press Mono Start or Colour Start.
To interrupt copying, press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Make sure you have loaded the correct size paper in the paper tray.
2. Load your document.
3. Press
[Copy].
The touchscreen displays:
4. Change the copy settings, if needed.
157
To Next Page
Loading...
