Brother MFC-J4340DW

Home > Fax > Receive a Fax > Set the Fax Receive Stamp
Set the Fax Receive Stamp
Set the machine to print the date and time of receipt at the top of each incoming fax page. Make sure you have
set the current date and time on the machine.
This feature is available only for monochrome faxes.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Setup Receive]. Press OK.
c. Select [Fax Rx Stamp]. Press OK.
d. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Fax Rx Stamp].
2. Press [On] (or [Off]).
3. Press .
Related Information
• Receive a Fax
205