Brother MFC-J4340DW

Home > Fax > Telephone Services and External Devices > Set the Telephone Line Type
Set the Telephone Line Type
If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, you must select
a Telephone Line Type that matches your line's features.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Phone Line Set]. Press OK.
c. Select [Normal], [PBX] or [ISDN]. Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Phone Line Set].
2. Press [Normal], [PBX], or [ISDN].
3. Press .
Related Information
• Telephone Services and External Devices
• PBX and TRANSFER
Related Topics:
• Telephone and Fax Problems
241