Brother MFC-J4340DW - Change the Fax Auto Redial Setting

Home > Fax > Send a Fax > Change the Fax Auto Redial Setting
Change the Fax Auto Redial Setting
If the line is busy when you are sending a fax automatically, and the Fax Auto Redial is set to [On], the machine
redials up to three times at five-minute intervals.
The default setting for Fax Auto Redial is [On].
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Fax Auto Redial]. Press OK.
c. Select [On] (or [Off]). Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Fax Auto Redial].
2. Press [On] or [Off].
3. Press .
Related Information
• Send a Fax
187