Troubleshooting
93
B
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press a or b to choose Serial No.
Press OK.
Your machine’s serial number will
appear on the LCD.
d Press Stop/Exit.
Checking the firmware
version B
You can see the machine’s firmware version
on the LCD.
a Press Menu.
b Press a or b to choose Machine Info.
Press OK.
c Press a or b to choose Version.
Press OK.
Your machine’s firmware version will
appear on the LCD.
d Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Machine Reset
You can reset all the machine’s settings
that you have changed, such as the date
and time, telephone line type and Ring
Delay.
2 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
3 Address&Fax
Address & Fax resets the following
settings:
Speed Dial
(Speed-Dial and Setup Groups)
Station ID
(Name and Number)
Report settings
(Transmission Verification Report,
Speed Dial and Fax Journal)
History
(Caller ID history and Outgoing Call)
Faxes in memory
4 All Settings
You can restore all settings to the factory
default.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
To Next Page
Loading...
