Brother MFC-J470DW - Setting the Date and Time

Routine maintenance
61
A
e Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
f For the “A” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
Repeat this step for the B, C and D
patterns.
In the example number 6 is the best
choice for A, B, C and D.
g Press Stop/Exit.
NOTE
Setting the date and
time
A
The LCD shows the date and time. If it is not
current, follow these instructions to re-enter it.
You can add the date and time to each fax
you send by setting your Station ID.
a Press Menu.
b Press a or b to choose
Initial Setup.
Press OK.
c Press a or b to choose Date & Time.
Press OK.
d Press a or b to choose Date & Time.
Press OK.
e Enter the last two digits of the year using
the dial pad, and then press OK.
f Enter the two digits for the month using
the dial pad, and then press OK.
g Enter the two digits for the day using the
dial pad, and then press OK.
h Enter the time (in 24-hour format) using
the dial pad, and then press OK.
(For example, enter 19:45 for 7:45 PM.)
i Press Stop/Exit.
i
When the print
alignment is not
adjusted correctly,
text looks blurry
like this.
After the print
alignment is
adjusted correctly,
text looks like this.