Brother MFC-J470DW - Copy Options

Chapter 8
46
Copy options 8
You can change the following copy settings.
Press COPY, and then press a or b to scroll
through the copy settings. When the setting
you want is highlighted, press OK.
(Basic User’s Guide)
For information about changing the following
copy settings, see page 46.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For information about changing the following
copy settings, see Advanced User’s Guide:
Copy options.
 Quality
 Enlarge/Reduce
 Page Layout
 2in1(ID)
 Stack/Sort
 Density
 Remove Background
 2-sided Copy
 Set New Default
 Factory Reset
NOTE
If you want to sort copies, use the ADF.
Paper Type 8
If you are copying on a special type of paper,
set the machine for the type of paper you are
using to get the best print quality.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press a or b to choose Paper Type.
Press OK.
e Press a or b to choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or Transparency.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Paper Size 8
If you are copying on paper other than A4
size, you will need to change the Paper Size
setting. You can copy only on A4, A5,
Photo (10  15 cm) or Letter paper.
a Load your document.
b Press (COPY).
c Enter the number of copies you want.
d Press a or b to choose Paper Size.
Press OK.
e Press a or b to choose A4, A5,
10x15cm, or Letter.
Press OK.
f If you do not want to change further
settings, press Mono Start or
Colour Start.