Brother MFC-J470DW - Fax Redial; Additional Dialling Operations; Outgoing Call History

Dialling and storing numbers
41
7
Fax Redial 7
If you are sending a fax automatically and the
line is busy, the machine will redial up to three
times at five minute intervals.
Redial only works if you dialled from the
control panel.
a Load your document.
b Press Redial/Pause.
c Press a or b to choose the number you
want to redial.
Press OK.
d Press a or b to choose Send a fax.
Press OK.
e Press Mono Start or Colour Start.
NOTE
In Real Time Transmission the automatic
redial feature does not work when you are
using the scanner glass.
Additional Dialling
Operations
7
Outgoing Call history 7
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
the Address Book, or delete from the history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (FAX).
b Press a or b to choose the number you
want.
Press OK.
c Do one of the following:
 To send a fax, press a or b to choose
Send a fax.
Press OK.
Press Mono Start or Colour Start.
 If you want to store the number,
press a or b to choose
Add to AddressBook.
Press OK.
(See Advanced User’s Guide:
Storing Speed Dial numbers from the
Outgoing Call history.)
 If you want to delete the number from
the Outgoing Call history list, press
a or b to choose Delete.
Press OK.
Press 1 to confirm.
d Press Stop/Exit.