Brother MFC-J470DW - Changing or Deleting Speed Dial Names or Numbers

Chapter 7
44
Changing or deleting Speed
Dial names or numbers 7
You can change or delete a Speed Dial name
or number that has already been stored.
a Press (Address Book).
You can also choose Address Book
by pressing (FAX).
b Press a or b to choose
Set Speed Dial.
Press OK.
c Press a or b to choose the 2-digit Speed
Dial number you want to change.
Press OK.
d Do one of the following:
 Press a or b to choose Change.
Press OK.
 Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
Go to step h.
NOTE
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
e If you want to change the name, press
a or b to choose Name, then press OK
and enter the new name using the dial
pad (up to 16 characters).
Press OK.
(For help entering letters, see Entering
Text on page 115.)
f If you want to change the fax or
telephone number, press a or b to
choose Fax/Tel, then press OK and
enter the new fax or telephone number
using the dial pad (up to 20 digits).
Press OK.
g Press a or b to choose Complete.
Press OK.
h Press Stop/Exit.