Brother MFC MFC-295CN User Manual

Troubleshooting and Routine Maintenance
109
B
Dial Tone detection B
When you send a fax automatically, by
default your machine will wait for a fixed
amount of time before it starts to dial the
number. By changing the Dial Tone setting to
Detection you can make your machine dial
as soon as it detects a dial tone. This setting
can save a small amount of time when
sending a fax to many different numbers. If
you change the setting and start having
problems with dialling you should change
back to the default No Detection setting.
a Press Menu, 0, 5.
b Press a or b to choose Detection or
No Detection.
Press OK.
c Press Stop/Exit.
Telephone line interference B
If you are having problems sending or
receiving a fax due to possible interference
on the telephone line, we recommend that
you adjust the Equalization for compatibility
to reduce the modem speed for fax
operations.
a Press Menu, 0, 6.
(Menu, 0, 5 for New Zealand.)
b Press a or b to choose Normal (or
Basic(for VoIP)).
 Basic(for VoIP) cuts the
modem speed to 9,600 bps. Unless
interference is a recurring problem
on your telephone line, you may
prefer to use it only when needed.
 Normal sets the modem speed at
14,400 bps. (Default)
Press OK.
c Press Stop/Exit.
Note
When you change the compatibility to
Basic(for VoIP), the ECM feature is
only available for colour fax sending.

Brother MFC MFC-295CN Specifications

General

Print Technology	Inkjet
Automatic Document Feeder	Yes
Display	LCD
Duplex Printing	Manual
Media Card Support	Yes
Scanner Type	Flatbed
Optical Resolution	1200 x 2400 dpi
Fax Type	Color
Max Fax Transmission Speed	33.6 kbps
Standard Media Capacity	100 sheets
Output Trays Capacity	50 sheets
Paper Capacity	100 sheets
Weight	15.4 lbs
Max Print Resolution	6000 x 1200 dpi
Max Document Size	8.5 x 14 inches
Connectivity	USB
Functions	Print, Scan, Copy, Fax
Monthly Duty Cycle (max)	2500 pages
Media Type	Envelopes, plain paper, photo paper
Ink Cartridge Configuration	4 individual cartridges