Brother MFC MFC-295CN User Manual

128
How to reset the machine B
a Press Menu, 0, 7.
(Menu, 0, 6 for New Zealand.)
b Press a or b to choose the reset function
you want to use.
Press OK.
c Press 1.Reset or 2.Exit.
d Press 1 to confirm.
Packing and shipping
the machine
B
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
properly pack your machine. Damage caused
to your machine during transit is not covered
by your warranty.
IMPORTANT
It is important to allow the machine to
‘park’ the print head after a print job. Listen
carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a Open the ink cartridge cover.
b Press the lock release lever to release
the ink cartridge and take out all the ink
cartridges. (See Replacing the ink
cartridges on page 119.)
c Install the green protective part, and
then close the ink cartridge cover.

Brother MFC MFC-295CN Specifications

General

Print Technology	Inkjet
Automatic Document Feeder	Yes
Display	LCD
Duplex Printing	Manual
Media Card Support	Yes
Scanner Type	Flatbed
Optical Resolution	1200 x 2400 dpi
Fax Type	Color
Max Fax Transmission Speed	33.6 kbps
Standard Media Capacity	100 sheets
Output Trays Capacity	50 sheets
Paper Capacity	100 sheets
Weight	15.4 lbs
Max Print Resolution	6000 x 1200 dpi
Max Document Size	8.5 x 14 inches
Connectivity	USB
Functions	Print, Scan, Copy, Fax
Monthly Duty Cycle (max)	2500 pages
Media Type	Envelopes, plain paper, photo paper
Ink Cartridge Configuration	4 individual cartridges