Brother MFC MFC-295CN - Changing the Remote Codes

Chapter 7
50
Changing the remote codes 7
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Remote Activation Code is l 51 (l 9 1 for
New Zealand). The preset Remote
Deactivation Code is #51 (#9 1 for New
Zealand). If you want to, you can replace
them with your own codes.
a Press Menu, 2, 1, 4.
1.Setup Receive
4.Remote Codes
b Press a or b to choose On (or Off).
Press OK.
c Enter the new Remote Activation Code.
Press OK.
d Enter the new Remote Deactivation
Code.
Press OK.
e Press Stop/Exit.
Note
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Remote Activation Code
and
Remote Deactivation Code to
another
three
- digit code using the numbers 0 - 9 , , # .
• Remote Codes might not work with some
telephone systems.