Brother MFC MFC-295CN User Manual

Troubleshooting and Routine Maintenance
121
B
d Turn the green knob on the protective
yellow cap clockwise until it clicks to
release the vacuum seal, then remove
the cap (1).
e Each colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.
f Gently push the ink cartridge until it
clicks, and then close the ink cartridge
cover.
g The machine will automatically reset the
ink dot counter.
Note
• If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one
(Did You Change Blck?). For each
new cartridge you installed, press 1 (Yes)
to automatically reset the ink dot counter
for that colour. If the ink cartridge you
installed is not a brand new one, be sure
to press 2 (No).
• If the LCD shows No Cartridge or
Cannot Detect after you install the ink
cartridges, check that the ink cartridges
are installed correctly.
CAUTION
If ink gets in your eyes, wash them out with
water at once and call a doctor if you are
concerned.
1

Brother MFC MFC-295CN Specifications

General

Print Technology	Inkjet
Automatic Document Feeder	Yes
Display	LCD
Duplex Printing	Manual
Media Card Support	Yes
Scanner Type	Flatbed
Optical Resolution	1200 x 2400 dpi
Fax Type	Color
Max Fax Transmission Speed	33.6 kbps
Standard Media Capacity	100 sheets
Output Trays Capacity	50 sheets
Paper Capacity	100 sheets
Weight	15.4 lbs
Max Print Resolution	6000 x 1200 dpi
Max Document Size	8.5 x 14 inches
Connectivity	USB
Functions	Print, Scan, Copy, Fax
Monthly Duty Cycle (max)	2500 pages
Media Type	Envelopes, plain paper, photo paper
Ink Cartridge Configuration	4 individual cartridges