Brother MFC6800 - WSW04 TRANSFER Facility Setting

6
WSW04
(TRANSFER facility setting)
Selector
No.
Function Setting and Specifications
1
Earth function in transfer facility 0: Provided 1: Not provided
2
|
4
Not used.
5
6
Earth time length for earth function
No. 5 6
0 0 : 200 ms
0 1 : 300 ms
1 0 : 500 ms
1 1 : 700 ms
7
8
Break time length for flash function
No. 7 8
0 0 : 80 ms
0 1 : 110 ms
1 0 : 250 ms
1 1 : 500 ms
NOTE: Selectors 5 through 8 are not applicable in those countries where no transfer facility is
supported.
 Selector 1: Earth function in transfer facility
This selector determines whether or not the earth function is added to the transfer setting menu to
be accessed by the function switch.
 Selectors 5 and 6: Earth time length for earth function
These selectors set the short-circuiting time length of the telephone line (La or Lb) to ground.
This setting is effective only when the earth function is selected for the R key by using the
function switch.
 Selectors 7 and 8: Break time length for flash function
These selectors set the break time length.
This setting is effective only when the flash function is selected for the R key by using the function
switch.