Brother MFC6800 - WSW14 AUTO ANS Facility Setting

18
WSW14
(AUTO ANS facility setting)
Selector
No.
Function Setting and Specifications
1
2
Frequency band selection
(Lower limit)
No. 1 2
00: 13 Hz
01: 15 Hz
10: 23 Hz
11: 20 Hz
3
4
Frequency band selection
(Upper limit)
No. 3 4
00: 30 Hz
01: 55 Hz
10: 70 Hz
1 1 : 200 Hz
5
|
8
No. of rings in AUTO ANS mode
No.5678
0000 : Fixed to once
0001 : Fixed to 2 times
0010 : Fixed to 3 times
0011 : Fixed to 4 times
0100 : 1 to 2 times
0101 : 1 to 3 times
0110 : 1 to 4 times
0111 : 1 to 5 times
1000 : 2 to 3 times
1001 : 2 to 4 times
1010 : 2 to 5 times
1011 : 2 to 6 times
1100 : 1 to 10 times
1101 : 2 to 10 times
1110 : 3 to 5 times
1111 : 4 to 10 times
 Selectors 1 through 4: Frequency band selection
These selectors are used to select the frequency band of calling signals for activating the AUTO
ANS facility.
In the French versions, if the user sets the PBX to OFF from the control panel, the setting made by
selectors 1 and 2 will take no effect and the frequency's lower limit will be fixed to 32 Hz. (Even if
the setting made by these selectors does not apply, it will be printed on the configuration list.)
 Selectors 5 through 8: No. of rings in AUTO ANS mode
These selectors set the number of rings to initiate the AUTO ANS facility.