20
WSW16
(Function setting 1)
Selector
No.
Function Setting and Specifications
1 Not used.
2 CCITT superfine recommendation 0: OFF 1: ON
3
|
6
Not used.
7 Max. document length limitation 0: 400 cm 1: 90 cm
8 Stop key pressed during reception 0: Not functional 1: Functional
Selector 2: CCITT superfine recommendation
If this selector is set to "1," the machine communicates in CCITT recommended superfine mode
(15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
Selector 8: Stop key pressed during reception
If this selector is set to "1," pressing the Stop key can stop the current receiving operation. The
received data will be lost.
To Next Page
Loading...
