Brother MFC6800 - WSW27 Function Setting 5

30
WSW27
(Function setting 5)
Selector
No.
Function Setting and Specifications
1 Definition of programmable key
0: TEL key 1: TEL/POLLING key
2 Ringer OFF setting
0: Yes 1: No
3 Not used.
4
Detection of distinctive ringing
pattern
0: Yes 1: No
5
|
7
Not used.
8 Toner save mode
0: Yes 1: No
NOTE: Selector 1 takes effect only in models/versions having a TEL key.
NOTE: Selector 4 is applicable only to the U.S.A. version.
 Selector 1: Definition of programmable key
This selector defines a programmable key as a TEL key or TEL/POLLING key.
Setting this selector to "1" allows the programmable key to function as either a TEL or POLLING
key if pressed when the handset is off or on the hook, respectively.
 Selector 2: Ringer OFF setting
This selector determines whether or not the ringer can be set to OFF.
 Selector 4: Detection of distinctive ringing pattern
If this selector is set to "1," the machine detects only the number of rings; if it is set to "0," the
machine detects the number of rings and the ringing time length to compare the detected ringing
pattern with the registered distinctive one.