53
*1 This is the default setting.
*2 These are used when specifying the number of copies printed and when selecting a template
number.
Scan barcodes to specify a three-digit number, such as [00][7] or [0][1][5]. The setting is
automatically applied when three digits have been specified.
To change settings, scan the “Number of copies” barcode again when changing the number of
copies or scan the “Select template” barcode again when changing the template number, and then
scan the barcodes for the new three-digit number.
• Preset template 5 • Preset template 6
• Preset template 7 • Preset template 8
• Preset template 9 • Preset template 10
■ Select template
■ Delimiter
■ Begin printing
PT9700PC9800PCN_US.book Page 53 Wednesday, October 7, 2009 11:58 AM
To Next Page
Loading...
