Home > Security > Use SSL/TLS > Manage Your Network Printer Securely Using SSL/TLS > Configure a
Certificate for SSL/TLS and Available Protocols
Configure a Certificate for SSL/TLS and Available Protocols
Related Models: PJ-883
Configure a certificate on your printer using Web Based Management before you use SSL/TLS
communication.
1. Start your web browser.
2. Type "https://printer's IP address" in your browser's address bar.
For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
For example:
https://brnxxxxxxxxxxxx
3. If required, type the password in the Login field, and then click Login.
The default password to manage this printer's settings is located in the battery cavity and marked "Pwd".
4. Go to the navigation menu, and then click Network > Network > Protocol.
Start from if the navigation menu is not shown on the left side of the screen.
5. Click HTTP Server Settings.
6. Select the certificate you want to configure from the Select the Certificate drop-down list.
7. Click Submit.
8. Click Yes to restart your print server.
Related Information
• Manage Your Network Printer Securely Using SSL/TLS
122
To Next Page
Loading...
