Home > Security > Use SSL/TLS > Manage Your Network Printer Securely Using SSL/TLS > Access
Web Based Management Using SSL/TLS
Access Web Based Management Using SSL/TLS
Related Models: PJ-883
To manage your network printer securely, use Web Based Management with the HTTPS protocol.
• To use HTTPS protocol, HTTPS must be enabled on your printer. The HTTPS protocol is enabled by
default.
• You can change the HTTPS protocol settings using Web Based Management.
1. Start your web browser.
2.
T
ype "https://Common Name" in your browser's address bar (where "Common Name" is the Common Name
that you assigned to the certificate; this could be your IP address, node name, or domain name).
3.
If required, type the password in the Login field, and then click
Login
.
The default password to manage this printer's settings is located in the battery cavity and marked "Pwd".
4. You can now access the printer using HTTPS.
Related Information
• Manage Y
our Network Printer Securely Using SSL/TLS
123
To Next Page
Loading...
