• When importing the computer's wireless settings, administrator privileges for the computer are needed.
• Only personal security authentication settings (open system, public key authentication, WPA/WPA2-
PSK, and WPA3 SAE up to 63 characters) can be imported. Enterprise security authentication (such as
EAP-FAST), WPA2-PSK (TKIP) and WPA-PSK (AES) settings cannot be imported.
• If multiple wireless LANs are enabled for the computer you use, the first detected wireless settings (only
personal settings) are considered for the import data.
• Only the settings from the Wireless LAN tab - Wireless Settings pane can be imported
(communication mode, SSID, authentication method, encryption mode and authentication key).
Select a Profile to import
Imports the exported file and applies the settings to a printer
. Click Browse
and select the file you want
to import. The settings in the selected file appear in the settings display/change area.
• All settings can be imported, except for node names.
• Only the profiles compatible with the selected printer can be imported.
• If the imported profile’s IP address is set to STATIC, change the IP address of the imported profile, if
needed, so that it does not duplicate the IP address of an existing configured printer on the network.
Export
Save the current settings in a file. If the Disable these settings checkbox is selected, the settings are not
saved.
Exported files are not encrypted.
Tools Menu Options
Option Settings
Automatically restart the printer after applying new settings
If this checkbox is selected, the printer automatically restarts after communication settings are applied. If
this checkbox is cleared, you must restart the printer manually
.
When configuring multiple printers, you can reduce the time needed to change settings by clearing this
checkbox. In this case, we recommend selecting this checkbox when configuring the first printer so that you
can confirm that each setting is operating as intended.
Automatically detects the connected printer, and retrieves the current settings
If this checkbox is selected and a printer is connected to the computer, the printer is automatically
detected and the printer's current settings are displayed in the Current Status pane.
If the connected printer is different from the printer shown in the Printer drop-down list, the settings
available on all tabs change to match the connected printer.
Change Node Name/Bluetooth Device Name
Allows renaming a node name and Bluetooth device name.
Reset to Default Communication Settings
Reset the communication settings to their factory settings.
Help Menu Options
Display Help
Displays the Help topics.
145
To Next Page
Loading...
