Brother PJ-822 - Page 152

SSID (Network Name)/Network Key
Specify the SSID (25 ASCII characters or fewer) and the network key (63 characters or fewer) you want to
use in the Wireless Direct mode.
The default SSID and Password are as follows:
- SSID: "DIRECT-*****_PJ-883" where ***** is the last five digits of the printer's serial number.
- Password: 883 *****
***** is the last five digits of the serial number located on the printer’s base.
Channel
Specify the channel to use for the Wireless Direct mode.
Bluetooth Tab
Bluetooth Settings
Bluetooth Mode
Select the control mode when Bluetooth is enabled.
Classic
Visible to Other Devices
Allows the printer to be discovered by other Bluetooth devices.
Change PIN code
Changes the PIN.
Display the PIN code on-screen
Displays the PIN on your computer.
Pairing requires user confirmation on printer
If this checkbox is selected when using Classic Bluetooth mode, it is necessary to perform additional printer
button operations when pairing with devices running Bluetooth 2.1 or later.
Auto re-pairing
Sets whether to automatically reconnect to a previously connected Apple device (iPad, iPhone or iPod
touch).
Low Energy
Minimum Security Mode
Select the minimum security level when using the Low Energy Only mode.
Pairing requires user confirmation on printer
If this checkbox is selected when using the Low Energy Only mode, it is necessary to perform additional
printer button operations when pairing with Low Energy compatible devices.
Related Information
• Change Printer Settings Using the Printer Setting T
ool (Windows)
148