SSID (Network Name)
Clicking Search displays the available SSIDs in a separate dialog box.
Channel
Displays the automatically selected channel.
Authentication Method
/Encryption Mode
The supported encryption modes for the authentication methods are shown in the table below.
Authentication Method Encryption Mode
Open System None / WEP
Shared Key WEP
WPA3-SAE AES
WPA/WPA2-PSK/WPA3-SAE TKIP+AES / AES
EAP-FAST/NONE TKIP+AES / AES
EAP-FAST/MS-CHAPv2 TKIP+AES / AES
EAP-FAST/GTC TKIP+AES / AES
PEAP/MS-CHAPv2 TKIP+AES / AES
PEAP/GTC TKIP+AES / AES
EAP-TTLS/CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAP TKIP+AES / AES
EAP-TTLS/MS-CHAPv2 TKIP+AES / AES
EAP-TTLS/PAP TKIP+AES / AES
EAP-TLS TKIP+AES / AES
To specify higher level security settings: When performing certificate verification with EAP-FAST, PEAP,
EAP-TTLS, or EAP-TLS authentication methods, the certificate cannot be specified from the Printer Setting
T
ool. After the printer is configured to connect to the network, specify the certificate by accessing the printer
from a web browser
. Installation of the authentication certificate can also be performed with the Printer
Setting T
ool by going to the menu bar: File
> Install Certificates.
WEP Key
Y
ou can specify a setting only when WEP is selected as the encryption mode.
Passphrase
Y
ou can specify a setting only when WP
A/WP
A2-PSK/WP
A3-SAE is selected as the authentication method.
User ID
/Password
Y
ou can specify settings only when EAP-F
AST
, PEAP
, EAP-TTLS, or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. T
o register a certificate, connect to the printer from a web browser, and then
specify the certificate.
Display the key and password on-screen
If this checkbox is selected, keys and passwords are displayed in plain (non-encrypted) text.
Wireless Direct Tab (PJ-883)
Wireless Direct Settings
SSID/Network Key Generation
Select the AUTO or STATIC option.
147
To Next Page
Loading...
