135
Your machine supports SSL/TLS communication methods. To use an email server that is using SSL/TLS
communication, you must configure the following settings.
Verify Server Certificate
Under SSL/TLS, if you choose SSL or TLS, the Verify Server Certificate checkbox will be selected automatically.
Port Number
If you select SSL, or TLS, the Port value will be changed to match the protocol. To change the port number
manually, type the port number after you select SSL/TLS settings.
You must configure your machine's communication method to match the method used by your email server. For
details about your email server settings, contact your network administrator or your ISP.
In most cases, the secured webmail services require the following settings:
Send an Email Securely Using SSL/TLS
We recommend using Web Based Management to configure SSL/TLS.
• Before you verify the server certificate, you must import the CA certificate issued by the CA that signed
the server certificate. Contact your network administrator or your Internet Service Provider (ISP) to confirm
if importing a CA certificate is necessary.
• If you do not need to verify the server certificate, clear the Verify Server Certificate checkbox.
SMTP Port 25
Server Authentication Method SMTP-AUTH
SSL/TLS TLS
• Send an Email Securely
Related Topics:
• Configure Certificates for Device Security
• Use SSL/TLS
To Next Page
Loading...
