18
The USB and Ethernet ports are located inside the machine (Ethernet ports are available only for certain models).
1. Place both hands under the plastic tabs on both sides of the machine to lift the top cover (1) into the open
position.
2. Locate the correct port (based on the cable you are using) inside the machine as shown.
3. Gently close the top cover using both hands.
USB / Ethernet Port Locations on Your Brother Machine
To install the driver and software necessary to use your machine, go to your model's Downloads page at https:/
/s.brother/ca2ab/.
Carefully guide the cable through the cable channel and out the back of the machine.
• Introduction to Your Machine
1
To Next Page
Loading...
