Brother SP-1 - Page 240

236
WLAN(Wi-Fi) Find Wi-Fi
Network
- - Configure your wireless network
settings manually.
TCP/IP BOOT Method - Select the Boot method that best
suits your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server - Specify the IP address of the
primary or secondary WINS
server.
DNS Server - Specify the IP address of the
primary or secondary DNS
server.
APIPA - Set the machine to allocate the IP
address from the link-local
address range automatically.
IPv6 - Turn the IPv6 protocol on or off.
WPS/Push Button - - Configure your wireless network
settings using the one-button
push method.
WPS/PIN Code - - Configure your wireless network
settings using WPS with a PIN.
Recover WLAN - - Reset and restart your wireless
network.
WLAN Status Status - View the current wireless network
status.
Signal - View the current wireless network
signal strength.
SSID - View the current SSID.
Comm. Mode - View the current Communication
mode.
MAC Address - - View the machine's MAC
address.
Level 3 Level 4 Level 5 Level 6 Descriptions