29
4. Load only one sheet of paper in the manual feed slot with the printing surface face up.
Using both hands, adjust the manual feed slot paper guides to make sure there is no gap between them and
the paper.
• DO NOT load more than one sheet of paper in the manual feed slot at any time. Doing this may cause
a paper jam. When printing multiple pages, do not feed the next sheet of paper until the LCD displays
a message instructing you to feed the next sheet.
• DO NOT load paper in the manual feed slot when you are printing from the paper tray. Doing this may
cause a paper jam.
When using Brother Sublimation Paper, make sure that the corner with a cut is positioned at the upper right
side (portrait orientation), as shown in the illustration.
To Next Page
Loading...
