72
4. The machine searches for your network and displays a list of available SSIDs. Press a or b to display the [<New
SSID>] option, and then press it.
5. Press [OK].
6. Enter the SSID name, and then press [OK].
7. Select the Authentication Method, and then press it.
8. Do one of the following:
• If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, select the Inner Authentication method
[NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP].
Select the encryption type [TKIP+AES] or [AES].
Select the verification method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID, user ID and password (if required),
and then press [OK] for each option.
- For other selections, enter the user ID and Password, and then press [OK] for each option.
• If you selected the [EAP-TLS] option, select the encryption type [TKIP+AES] or [AES].
The machine will display a list of available Client Certificates, and then select the certificate.
Select the verification method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID and user ID, and then press [OK] for
each option.
- For other selections, enter the user ID, and then press [OK].
9. The machine attempts to connect to the wireless device you have selected.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install the drivers or your application necessary for operating
your device, go to your model's Downloads page at https://s.brother/ca2ab/
.
For more information about how to enter text, see Related Information.
Depending on your Authentication method, the Inner Authentication method selections differ.
If you have not imported a CA certificate into your machine, the machine displays [No Verification].
• Use the Wireless Network
Related Topics:
• Enter Text on Your Brother Machine
To Next Page
Loading...
