BRP ROTAX 916 i A Series Maintenance Manual

Effectivity: 916 i A / C24
Edition 0/Rev. 1
Page 56
December 01 2023
N
New oil filter - installation .....................................35
Non compliance — coolant specification ...............25
Non compliance — fuel quality .............................39
O
Oil change ..........................................................30
Oil filter removal ..................................................31
Oil level check/Replenish.......................................7
Oil pressure below minimum value .......................34
Oil specification not respected..............................37
Operating hours ....................................................2
P
Periodic rise and fall in boost pressure and
speed ...............................................................43
Procedure notes ...................................................5
Propeller gearbox................................................51
Propeller Strike Inspection .....................................7
Purging the oil system ..................................... 3, 38
R
Radiator cap .......................................................24
Read out the ECU data memory ...........................14
Removal of the propeller gearbox ...........................2
Remove the spark plugs ......................................45
Replacement of spark plugs .................................45
Replacing the coolant ..........................................21
Replenishing operating fluids .................................1
Reporting ...........................................................45
S
Safety ................................................................10
Safety information ............................................... 11
Scheduled maintenance ........................................2
Scheduled maintenance checks ......................... 1–2
Servicing points on the engine................................2
Smooth performance of the engine .......................40
Spark plug not in accordance with specification .....39
Sudden drop in boost pressure and speed ............41
Sudden increase in boost pressure and speed ......42
T
Table of amendments ............................................1
Technical documentation .....................................15
Terminology ..........................................................2
Terms...................................................................3
Test run of engine................................................17
Time limit..............................................................3
Time Limit.............................................................4
Time limit for the coolant ........................................6
Time limit, parts.....................................................6
Time limits ............................................................1
Troubleshooting ....................................................7
Turbocharger ......................................................49
U
Unscheduled maintenance checks ..................... 3, 1
Use for intended purpose.....................................17
V
Visual inspection ...................................................4
W
Wiring color codes.................................................8
BRP-Rotax
MAINTENANCE MANUAL LINE

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English