MAINTENANCE SCHEDULE
EVERY 15 000 KM (9,300 MI)
Check reverse mechanism operation. Adjust as required (SM5 model only).
Clean the rear wheel speed sensor. Check the sensor gap. Adjust as required
(1)
.
Using BRP Utility and Diagnostic Software (B.U.D.S.), check pillion rider switch
operation.
Check battery connection tightening. Clean them if necessary.
Check operation of electric windshield.
Check shock absorbers for leak or other damages.
Lubricate front suspension arms.
Check Air Controlled Suspension (ACS) for leak or other damages (RT-S and LTD
Models).
Check brake hoses for cracks or other damages.
Check operation of storage compartment latches, hinges and key barrels.
(1)
Check the gap each time the rear wheel is loosened.
124
______________
To Next Page
Loading...
