BRP Spyder RT - MAINTENANCE PROCEDURES; Engine Oil

MAINTENANCE SCHEDULE
EVERY 22 500 KM (14,000 MI)OR 2 YEARS (WHICHEVER COMES FIRST)
Inspect and clean the oil tank strainer.
Check and adjust valves clearance
(1)
.
Replace air filter and clean air filter housing
(2)
.
Replace clutch fluid (SM5 model only).
Replace engine coolant.
Check cooling system cleanliness, general condition and leaks.
Perform a pressure test of cooling system.
Inspect and clean the throttle body.
Check condition of fuel hoses. Replace as required.
Spark plugs replacement.
Check bearing condition of rear sprocket and rear wheel.
Replace bearing seals and wear sleeves of rear axle.
Check front wheel bearings condition.
Perform steering alignment.
Check ball joint condition.
Replace brake fluid.
(1)
Valve adjustment must be performed more frequently if driving often at high RPM.
(2)
Inspection and replacement more frequent when using in dusty or wet areas.
EVERY 30 000 KM (19,000 MI)OR 5 YEARS (WHICHEVER COMES FIRST)
Replace the fuel filter.
EVERY 46 000 KM (28,500 MI)
Replace the rear sprocket bearing.
______________
125