HOW TO REPLACE FUSES AND LIGHTS
License Plate Light
1. Remove the lens screws with a
Phillips head screwdriver.
rmo2010-001-080_a
1. License plate lens screws
2. Pull out the lens.
3. Remove the bulb by pulling it out.
rmo2010-001-081_a
1. Pull out
4. Install the new bulb by pushing it in.
5. Reinstall the lens.
Backup Light
1. Open the top storage compartment.
2.Openthesidestoragecompart
-
ments.
3. Remove the 8 retaining sc
rews
from the rear panel.
rmo2010-001-082_a
1. Rear panel
2. Retaining screws
4. Pull out panel.
rmo2010-001-083
5. Unplug connector.
6. Turn the bulb counterclockwise to
unlock it.
rmo2010-001-084_a
1. Turn counterclockwise
7. Pull bulb out.
158
______________
To Next Page
Loading...
