HOW TO REPLACE FUSES AND LIGHTS
rmo2010-001-079_b
1. Turn clockwise
14. Plug connector to the bulb.
15. Reinstall headlight cover and re-
maining parts in the reverse order
of the removal.
Fog Light (Option Package)
See your authorized Can-Am roadster
dealer for the bulb replacement proce-
dure.
Position Light
Base Model Only
1. Push then hold lens towards rear of
fender.
rmo2008-003-001_a
2. Lift front portion of lens with y
our
thumb or a small screwdriver to re-
lease.
rmo2008-003-002_a
3. Turn the bulb holder clockwise and
remove it from the connector.
rmo2008-001-086_a
1. Turn clockwise
4. Pull bulb out of the holder as indi-
cated below.
rmo2008-001-087_a
1. Pull out bulb
5. Insert a new bulb in the holder.
6. Properly reinstall the parts in the re-
verse order of their removal.
RT-SandRTLTDModels
The position lights are b
uilt with LEDs
(light emitting diode) and this tech-
nology proved to be reliable. In the
unlikely event they do
not work,
have them checked by an authorized
Can-Am roadster dealer.
______________
157
To Next Page
Loading...
