BRP Spyder RT - Page 168

SPECIFICATIONS
MODEL SPYDER RT
GEARBOX
SM5
Sequential Manual 5-speed (SM5) with remote
electronic reverse interlock
Type
SE5 Sequential Electronic 5-speed (SE5) with reverse interlock
COOLING SYSTEM
Type Liquid cooled, single radiator with cooling fan
Type
Ethyl glycol/water mix (50% coolant, 50% distilled water).
Use premixed coolant sold by BRP (P/N 219 700 362) or
coolant specifically designed for aluminum engines
Coolant
Capacity 3.2 L (.85 U.S. gal.)
ELECTRICAL SYSTEM
Magneto generator output 650 W at 2000 RPM
Ignition system type Electronic ignition with dual output coil
Ignition timing Not adjustable
Quantity
2
Make and type
NGK KR8BI (apply heat-sink paste P12
(P/N 420 897 186) on spark plug threads)
Spark plug
Gap 0.7 mm to 0.8 mm (.028 in to .031 in)
Engine RPM limiter
setting
Forward 9500 RPM
Type Yuasa YTX24HL-BS
Voltage 12 volts
Nominal rating 21 A•h
Battery
Recommended
charging rate
2A
Headlight 2 x 55 W halogen (type H9)
Fog light (Spyder RT-S) 2 x 35 W halogen
Taillight/brake light LED 3.1 W total
Front LED 4.5 W each side
Turn signal lights
Rear 2 x 20 W
Position lights 2 x 5 W
License plate light 5 W
Backup light 2 x 20 W
Front storage compartment light
(Spyder RT-S/LTD)
0.2 W
Fuses Refer to FUSES
166
______________