EasyManua.ls Logo

BRP Spyder RT - Page 169

BRP Spyder RT
191 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
MODEL SPYDER RT
FUEL SYSTEM
Fuel delivery Type
Multi-point Electronic Fuel Injection (EFI)
with ETC (Electronic Throttle Control).
Dual throttle body (51 mm) with an actuator
Fuel pump Type Electrical module in fuel tank
Idle speed 1400 ± 100 RPM (electronically controlled, not adjustable)
Type
Regular unleaded gasoline (fuel which may contain
up to 10% MAX ethanol)
Inside North America
Recommended for optimum performance: 91 (R+M)/2.
Minimum: 87 (R+M)/2
Fuel
Octane
no.
Outside North America
Recommended for optimum performance: 95 RON.
Minimum: 92 RON
Fuel tank capacity 25 L (6.6 U.S. gal.)
DRIVE SYSTEM
Final drive type Carbon reinforced drive belt
Final drive ratio 28/79
STEERING
Type Dynamic Power Steering (DPS)
FRONT SUSPENSION
Suspension type Double A-arm with anti-roll bar
Suspension travel 151 mm (5.9 in)
Qty
2
Shock absorber
Type SACHS twin-tube coil-over
REAR SUSPENSION
Suspension type
Air Controlled Suspension (ACS).
Compressor-controlled (ACS with remote adjustment only).
Swing arm with monoshock
Suspension travel 174 mm (6.85 in)
Qty
1
Shock absorber
Type SACHS twin-tube coil-over
Preload adjustment
(ACS with manual adjustment)
Adjustable air pressure:1
35 kPa to 625 kPa
(20 PSI to 90 PSI)
Preload adjustment
(ACS with remote adjustment)
5 positions
______________
167

Table of Contents

Related product manuals