Bryant Evolution Connex SYSTXBBECC01- - 4.Fan Coil G- - Terminal; 5.Fan Coil G- - Terminal Alert; 6.Fan Coil G- - Terminal Label

39
6.3.2.5. Fan Coil G--Terminal Alert
Use the alert function to select the contact state for an alert. Select Normally Open
or Normally Closed, and then save your selection.
A13230
Shutdown: This setup option selects the change of state required for shutdown. .
Select Normally Open or Normally Closed, and then save your selection.
A13231
6.3.2.6. Fan Coil G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the main
screen and in the notification email when the alert becomes active.