80
7.0 Wireless Set--up
With the appropriate models, the Evolution Connex Control can connect to the
in --home Wi --Fi
®
network to connect the Evolution System to the Internet. If the
in --home Wi--Fi network is found to be incompatible with SYSTXBBITC01--A, an
Evolution Wireless Access Point (SYSTXXXGWR01) or any other compatible
wireless router can be installed to establish Wi--Fi network connectivity.
Please call 1--800--Evolution for support network with Wi--Fi network set--up and
connection to the MyEvolution Server.
The ability to remotely access and adjust the settings of the Evolution Connex
Control with the MyEvolution web and mobile applications is dependent on the
compatibility of the user’s computer/network or mobile device, the Evolution
Connex Control, and/or the MyEvolution web server with, and the availability of,
the user’s Internet service provider or mobile device Bryant service. Bryant
Heating and Cooling makes no representations or warranties, express or implied,
including, to the extent permitted by applicable law, any implied warranty of
merchantability or fitness for a particular purpose or use, about the compatibility
of the user’s computer/network, or mobile device, with the Evolution Connex
Control, and/or the MyEvolution web server, with, and the availability of, the
user’ s Internet service provider or mobile device carrier service, or that the ability
to remotely access and adjust the settings of the Evolution Connex Control will
not be negatively affected by the network-related modifications, upgrades, o r
similar activity of the user’s Internet service provider or mobile device carrier
service.
NOTE: See the Owner’s Manual for information regarding software upgrades.
7.1 Setup and Status Information (Homeowner’s Router)
To establish Wi--Fi connectivity to the Evolution Connex Control using the
in --home router or wireless access point the wireless access point SSID and
password/passkey must be known for set --up.
To Next Page
Loading...
