71
equipment that generated the event. To return to the previous screen, touch BACK.
To exit the Service menus, touch DONE.
A12151
6.5.9. Run/Fault History
This information is stored in the equipment circuit boards (if communicating) and
displayed on the control. The indoor unit and outdoor unit (if communicating) have
the following histories. To return to the previous screen, touch BACK.Toexitthe
Service menus, touch DONE.
S Resettable Faults: Fault counters for each piece of equipment that can be reset.
S Cycle Counters: Number of heat/cool/power cycles the unit h as performed.
S Run Times: Lifetime hours of operation in heating, cooling, and how long the
unit has been powered.
A12202
To Next Page
Loading...
