Quick Reference Guide QRG
Qick Reference Guide EDV no.: MD.337.01.04
ekrPro Com60 with CLS Pro 600 Issue date: 30.06.2011
General information
This Quick Reference Guide describes the assembly and the
commissioning of the web guiding system ekrPro Com
60
with
CLS Pro 600.
The web guiding system ekrPro Com
60
with CLS Pro 600 should
only be commissioned after you have acquainted yourself with the
corresponding more detailed operating manual of the controller
ekrPro Com
60
and the line and contrast sensor CLS Pro 600. This
will help to avoid hazards and prevent damage to the system due
to improper commissioning or operation.
Prior to commissioning and before performing any maintenance
work, you must read, without fail, the safety instructions in the
corresponding operating manual!
The detailed operating manual for the devices specified above are
a part of the delivery. They can also be found in internet under the
following address:
http://www.bst-international.com
BST eltromat International Bielefeld GmbH
Heidsieker Heide 53
33739 Bielefeld, Germany
Telefon: +49 5206 999-0
Telefax: +49 5206 999-999
info@bst-international.com
Our service department is available for special queries
under the telephone number 0049 (0) 5206 999760 or under
service@bst-international.com.
To Next Page
Loading...