11 – 2 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Brakes 3180
Releasing the brake
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
11.2 Releasing the brake
Note:
The brakes should only be released when the truck needs to be
moved in connection with service and repair work.
The brakes on the truck can be released manually by screwing two
screws (M5) into the holes (A). The screws must be 30-35 mm long.
Note:
Remember to remove the screws before operating the truck again.
A
https://www.besttruckmanuals.com/
To Next Page
Loading...
