6 – 10 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Functions and parameters
Parameters
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
6.5.3 Setting the parameters
Proceed as follows to set parameters:
1. Connect the CAN key or enter a PIN code, then press the horn
button and keep it depressed. Release the horn button when the
display shows “P”.
The parameter symbol is lit continuously.
2. Turn the speed control to scroll to the desired parameter. Release
the control when the display shows the correct parameter number.
3. Press once on the horn button to change the value.
The parameter symbol starts blinking.
4. Change the value by turning the speed control.
5. Confirm the setting by pressing once more on the horn button.
The parameter symbol lights continuously once again.
6. Complete the programming by pressing the OFF button.
https://www.besttruckmanuals.com/
To Next Page
Loading...
