Troubleshooting
Test function for the display
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 7 – 37
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
7.9 Test function for the display
The digital display itself can be tested to verify all segments of the
display function correctly.
Proceed as follows to the test the display:
1. Ensure that the battery is connected.
2. Ensure that the truck is switched off. Press the OFF button.
3. Enter the appropriate PIN code. Note: Without pressing the ON
button.
4. Keep the horn button depressed until “d” is displayed, then release
it.
All segments and symbol icons must flash sequentially.
https://www.besttruckmanuals.com/
To Next Page
Loading...
