Introduzione
- I.2 - WINDINGFEEDER
How to use this manual
This Operation Manual is divided into 4 Chapters.
Chapter 1 – Overview describes the main features, components and the operation
principle of WINDINGFEEDER devices.
Chapter 2 – Technical Data and Installation gives the necessary instructions to
install the devices.
Chapter 3 – Operation gives a detailed description of the necessary operations to
setup and program the WINDINGFEEDER devices according to the application
needs.
Chapter 4 – Troubleshooting and Maintenance provides a quick guide to solving
the main failures of WINDINGFEEDER devices.
Symbols used
Highlights notes, warnings and subjects to which the attention of the reader
should be directed.
Indicates a particularly sensitive situation which could have an effect
on the safety or proper operation of the system.
TENSION ERROR
All the items concerning the device programming menus, within this
manual, are always show in CAPITAL LETTERS.
Reference Documentation
For operating details about the programming/analysis and monitoring systems
available for WINDINGFEEDER device management, please refer to the
following BTSR manuals.
SMART MATRIX FEEDER Manual – Rev. 2.2 – Ed. 03/2008
PC-LINK KTF Manual– Rev. 2.0 – Ed. 09/2005
PC-LINK KTF Studio Manual – Rev. 1.0 – Ed. 03/2005
P1.2
To Next Page
Loading...
