Need help?Do you have a question about the btsr SMART KTF 2000 and is the answer not in the manual?
Explains how to navigate the manual and interpret symbols used throughout the document.
Details the main features, capabilities, and supported applications of the SMART KTF 2000 terminal.
Covers the terminal's technical specifications and provides diagrams for system connections.
Guides through initial system power-on, software checks, and basic operational sequences.
Explains access to SETUP, MEASUR, and CONTROL menus for system configuration and monitoring.
Details numbering devices, setting offsets, and configuring system and application parameters.
Describes how to create, modify, read, load, erase articles, and transfer data.
Explains how to measure yarn tension, speed, amount, and use the LEARN function for calibration.
Covers setting access keycodes, language selection, and running diagnostic tests.
Guides through initial system power-on, software checks, and basic operational sequences.
Covers numbering devices, setting offsets, and configuring system, application, and security settings.
Explains access to WORK, MEASUR, and CONTROL menus for system operation.
Describes how to create, modify, read, erase articles, and manage data.
Lists common faults, their causes, and recommended solutions for the SMART KTF 2000 terminal.
Provides guidance on cleaning, repairs, and updating the system's software version.
Provides summarized flow-charts for operating sequences on KTF/100HP and KTF/RW devices.
General| Category | Control Systems |
|---|---|
| Model | SMART KTF 2000 |
| Manufacturer | BTSR |
| Protection Rating | IP20 |
| Input Signal | Analog (0-10V, 4-20mA) |
| Display | LCD |
| Power Supply | 24V DC ±10% |
| Communication Interface | RS485 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Mounting | DIN Rail |
| Output Signal | Analog 0-10V / 4-20mA, Relay Output |
To Next Page