btsr SMART KTF 2000 - SIGNAL TEST - Test of Signals between SMART KTF 2000 and Textile Machine

SMART KTF 2000 – KTF/100HP Operation
3A-24 SMART KTF 2000
SIGNAL TEST - Test of signals between SMART KTF 2000 and Textile Machine
SETUP



CONFIG



TEST



SIGNAL
This Function allows you to check the status of the interface signals between
SMART KTF 2000 terminal and Textile Machine.
Once you have selected the >TEST CONFIG screen, press
to access the
function.
Press
to select the Signal Test, then press to start the test.
The screen indicates the values detected during the PRX, ZPX and STC signal test
 The field “*” may assume the following values:
H = High Logical Level
L = Low Logical Level
Press
once to leave the function, or press it several times to return to the Main
Menu.